dmesg - kernel 3.2
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.46-compil-14 (root@debian) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Tue Jun 18 15:07:31 CEST 2013
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cfcf0000 (usable)
BIOS-e820: 00000000cfcf0000 - 00000000cfcf1000 (ACPI NVS)
BIOS-e820: 00000000cfcf1000 - 00000000cfd00000 (ACPI data)
BIOS-e820: 00000000cfd00000 - 00000000cfe00000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000210000000 (usable)
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. GA-890GPA-UD3H/GA-890GPA-UD3H, BIOS FF 11/24/2010
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x210000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 base 0000CFD00000 mask FFFFFFF00000 uncachable
4 base 0000CFE00000 mask FFFFFFE00000 uncachable
5 base 000100000000 mask FFFF00000000 write-back
6 base 000200000000 mask FFFFF0000000 write-back
7 disabled
TOM2: 0000000230000000 aka 8960M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000cfd00000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcfcf0 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000f44e0] f44e0
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000096000] 96000 size 20480
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000cfcf0000
0000000000 - 00c0000000 page 1G
00c0000000 - 00cfc00000 page 2M
00cfc00000 - 00cfcf0000 page 4k
kernel direct mapping tables up to cfcf0000 @ 1fffd000-20000000
init_memory_mapping: 0000000100000000-0000000210000000
0100000000 - 0200000000 page 1G
0200000000 - 0210000000 page 2M
kernel direct mapping tables up to 210000000 @ cfcee000-cfcf0000
RAMDISK: 375ee000 - 37aef000
ACPI: RSDP 00000000000f5e80 00014 (v00 GBT )
ACPI: RSDT 00000000cfcf1000 00040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 00000000cfcf1080 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 00000000cfcf1100 076BC (v01 GBT GBTUACPI 00001000 MSFT 03000000)
ACPI: FACS 00000000cfcf0000 00040
ACPI: SSDT 00000000cfcf8880 00EDC (v01 PTLTD POWERNOW 00000001 LTP 00000001)
ACPI: HPET 00000000cfcf9780 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 00000000cfcf97c0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: MATS 00000000cfcf9800 00034 (v01 GBT 00000000 00000000)
ACPI: TAMG 00000000cfcf9870 00202 (v01 GBT GBT B0 5455312E BG?? 53450101)
ACPI: APIC 00000000cfcf87c0 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-0000000210000000
Initmem setup node 0 0000000000000000-0000000210000000
NODE_DATA [000000020fffb000 - 000000020fffffff]
[ffffea0000000000-ffffea00073fffff] PMD -> [ffff880207e00000-ffff88020e7fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00210000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009b
0: 0x00000100 -> 0x000cfcf0
0: 0x00100000 -> 0x00210000
On node 0 totalpages: 1965179
DMA zone: 56 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3918 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 832808 pages, LIFO batch:31
Normal zone: 15232 pages used for memmap
Normal zone: 1098880 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000cfcf0000 - 00000000cfcf1000
PM: Registered nosave memory: 00000000cfcf1000 - 00000000cfd00000
PM: Registered nosave memory: 00000000cfd00000 - 00000000cfe00000
PM: Registered nosave memory: 00000000cfe00000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
Allocating PCI resources starting at cfe00000 (gap: cfe00000:10200000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88020fc00000 s82240 r8192 d24256 u262144
pcpu-alloc: s82240 r8192 d24256 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1935606
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ c4000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ c4000000
PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
Memory: 7606784k/8650752k available (4221k kernel code, 790036k absent, 253932k reserved, 1894k data, 608k init)
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:744 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3615.392 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 7233.06 BogoMIPS (lpj=12051306)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 00cfe00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
ACPI: Core revision 20110623
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) II X6 1090T Processor stepping 00
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 96000
#2
smpboot cpu 2: start_ip = 96000
#3
smpboot cpu 3: start_ip = 96000
#4
smpboot cpu 4: start_ip = 96000
#5
smpboot cpu 5: start_ip = 96000
Brought up 6 CPUs
Total of 6 processors activated (43408.79 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region at cfcf0000 (4096 bytes)
print_constraints: dummy:
NET: Registered protocol family 16
node 0 link 0: io port [b000, ffff]
TOM: 00000000d0000000 aka 3328M
Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, dfffffff]
node 0 link 0: mmio [f0000000, fe02ffff]
node 0 link 0: mmio [e0000000, e04fffff] ==> [e0100000, e04fffff]
TOM2: 0000000230000000 aka 8960M
bus: [00, 04] on node 0 link 0
bus: 00 index 0 [io 0x0000-0xffff]
bus: 00 index 1 [mem 0x000a0000-0x000bffff]
bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
bus: 00 index 3 [mem 0xe0500000-0xffffffff]
bus: 00 index 4 [mem 0xe0100000-0xe04fffff]
bus: 00 index 5 [mem 0x230000000-0xfcffffffff]
Extended Config Space enabled on 1 nodes
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
ACPI Warning: Incorrect checksum in table [TAMG] - 0x45, should be 0x44 (20110623/tbutils-314)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xfebfffff]
pci 0000:00:00.0: [1022:9601] type 0 class 0x000600
pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
pci 0000:00:01.0: [1022:9602] type 1 class 0x000604
pci 0000:00:05.0: [1022:9605] type 1 class 0x000604
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: [1022:9609] type 1 class 0x000604
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:12.2: reg 10: [mem 0xfe02d000-0xfe02d0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:13.0: reg 10: [mem 0xfe02c000-0xfe02cfff]
pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:13.2: reg 10: [mem 0xfe02b000-0xfe02b0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]
pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
pci 0000:00:14.5: reg 10: [mem 0xfe02a000-0xfe02afff]
pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:16.0: reg 10: [mem 0xfe029000-0xfe029fff]
pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:16.2: reg 10: [mem 0xfe028000-0xfe0280ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
pci 0000:01:05.0: [1002:9714] type 0 class 0x000300
pci 0000:01:05.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
pci 0000:01:05.0: reg 14: [io 0xee00-0xeeff]
pci 0000:01:05.0: reg 18: [mem 0xfdee0000-0xfdeeffff]
pci 0000:01:05.0: reg 24: [mem 0xfdd00000-0xfddfffff]
pci 0000:01:05.0: supports D1 D2
pci 0000:01:05.1: [1002:970f] type 0 class 0x000403
pci 0000:01:05.1: reg 10: [mem 0xfdefc000-0xfdefffff]
pci 0000:01:05.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfdd00000-0xfdefffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [1033:0194] type 0 class 0x000c03
pci 0000:02:00.0: reg 10: [mem 0xfdafe000-0xfdafffff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PCI bridge to [bus 02-02]
pci 0000:00:05.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:05.0: bridge window [mem 0xfda00000-0xfdafffff]
pci 0000:00:05.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:03:00.0: reg 10: [io 0xce00-0xceff]
pci 0000:03:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
pci 0000:03:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PCI bridge to [bus 03-03]
pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:0a.0: bridge window [mem 0xfd800000-0xfd8fffff]
pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref]
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:05.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
reserve RAM buffer: 000000000009b800 - 000000000009ffff
reserve RAM buffer: 00000000cfcf0000 - 00000000cfffffff
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0xcff00000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io 0x0010-0x001f]
pnp 00:01: [io 0x0022-0x003f]
pnp 00:01: [io 0x0044-0x005f]
pnp 00:01: [io 0x0062-0x0063]
pnp 00:01: [io 0x0065-0x006f]
pnp 00:01: [io 0x0074-0x007f]
pnp 00:01: [io 0x0091-0x0093]
pnp 00:01: [io 0x00a2-0x00bf]
pnp 00:01: [io 0x00e0-0x00ef]
pnp 00:01: [io 0x04d0-0x04d1]
pnp 00:01: [io 0x0220-0x0225]
pnp 00:01: [io 0x0290-0x0294]
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x0220-0x0225] has been reserved
system 00:01: [io 0x0290-0x0294] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io 0x4100-0x411f]
pnp 00:02: [io 0x0228-0x022f]
pnp 00:02: [io 0x040b]
pnp 00:02: [io 0x04d6]
pnp 00:02: [io 0x0c00-0x0c01]
pnp 00:02: [io 0x0c14]
pnp 00:02: [io 0x0c50-0x0c52]
pnp 00:02: [io 0x0c6c-0x0c6d]
pnp 00:02: [io 0x0c6f]
pnp 00:02: [io 0x0cd0-0x0cd1]
pnp 00:02: [io 0x0cd2-0x0cd3]
pnp 00:02: [io 0x0cd4-0x0cdf]
pnp 00:02: [io 0x4000-0x40fe]
pnp 00:02: [io 0x4210-0x4217]
pnp 00:02: [io 0x0b00-0x0b0f]
pnp 00:02: [io 0x0b10-0x0b1f]
pnp 00:02: [io 0x0b20-0x0b3f]
pnp 00:02: [mem 0x00000000-0x00000fff window]
pnp 00:02: [mem 0xfee00400-0xfee00fff window]
pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
system 00:02: [io 0x4100-0x411f] has been reserved
system 00:02: [io 0x0228-0x022f] has been reserved
system 00:02: [io 0x040b] has been reserved
system 00:02: [io 0x04d6] has been reserved
system 00:02: [io 0x0c00-0x0c01] has been reserved
system 00:02: [io 0x0c14] has been reserved
system 00:02: [io 0x0c50-0x0c52] has been reserved
system 00:02: [io 0x0c6c-0x0c6d] has been reserved
system 00:02: [io 0x0c6f] has been reserved
system 00:02: [io 0x0cd0-0x0cd1] has been reserved
system 00:02: [io 0x0cd2-0x0cd3] has been reserved
system 00:02: [io 0x0cd4-0x0cdf] has been reserved
system 00:02: [io 0x4000-0x40fe] has been reserved
system 00:02: [io 0x4210-0x4217] has been reserved
system 00:02: [io 0x0b00-0x0b0f] has been reserved
system 00:02: [io 0x0b10-0x0b1f] has been reserved
system 00:02: [io 0x0b20-0x0b3f] has been reserved
system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: [io 0x0000-0x000f]
pnp 00:03: [io 0x0080-0x0090]
pnp 00:03: [io 0x0094-0x009f]
pnp 00:03: [io 0x00c0-0x00df]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: [io 0x0070-0x0073]
pnp 00:04: [irq 8]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [io 0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io 0x00f0-0x00ff]
pnp 00:06: [irq 13]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [io 0x03f8-0x03ff]
pnp 00:07: [irq 4]
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:08: [mem 0xe0000000-0xefffffff]
system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [mem 0x000d4200-0x000d7fff]
pnp 00:09: [mem 0x000f0000-0x000f7fff]
pnp 00:09: [mem 0x000f8000-0x000fbfff]
pnp 00:09: [mem 0x000fc000-0x000fffff]
pnp 00:09: [mem 0xcfcf0000-0xcfcfffff]
pnp 00:09: [mem 0xffff0000-0xffffffff]
pnp 00:09: [mem 0x00000000-0x0009ffff]
pnp 00:09: [mem 0x00100000-0xcfceffff]
pnp 00:09: [mem 0xcfd00000-0xcfdfffff]
pnp 00:09: [mem 0xcfe00000-0xcfefffff]
pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:09: [mem 0xfec00000-0xfec00fff]
pnp 00:09: [mem 0xfee00000-0xfee00fff]
pnp 00:09: [mem 0xfff80000-0xfffeffff]
pnp 00:09: disabling [mem 0x000d4200-0x000d7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:09: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:09: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:09: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:09: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:09: disabling [mem 0x00100000-0xcfceffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:09: [Firmware Bug]: [mem 0x00000000-0xffffffffffffffff disabled] covers only part of AMD MMCONFIG area [mem 0xe0000000-0xe00fffff]; adding more reservations
system 00:09: [mem 0xcfcf0000-0xcfcfffff] could not be reserved
system 00:09: [mem 0xffff0000-0xffffffff] has been reserved
system 00:09: [mem 0xcfd00000-0xcfdfffff] has been reserved
system 00:09: [mem 0xcfe00000-0xcfefffff] could not be reserved
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfee00000-0xfee00fff] could not be reserved
system 00:09: [mem 0xfff80000-0xfffeffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfdd00000-0xfdefffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 02-02]
pci 0000:00:05.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:05.0: bridge window [mem 0xfda00000-0xfdafffff]
pci 0000:00:05.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref]
pci 0000:00:0a.0: PCI bridge to [bus 03-03]
pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:0a.0: bridge window [mem 0xfd800000-0xfd8fffff]
pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 04-04]
pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref]
pci 0000:00:05.0: setting latency timer to 64
pci 0000:00:0a.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfdefffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfda00000-0xfdafffff]
pci_bus 0000:02: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xfd800000-0xfd8fffff]
pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfdcfffff]
pci_bus 0000:04: resource 2 [mem 0xfdb00000-0xfdbfffff pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:04: resource 8 [mem 0xcff00000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
pci 0000:01:05.0: Boot video device
PCI: CLS 4 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 5124k freed
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
audit: initializing netlink socket (disabled)
type=2000 audit(1372212355.079:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 14995
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:05.0: setting latency timer to 64
pcieport 0000:00:05.0: irq 40 for MSI/MSI-X
pcieport 0000:00:0a.0: setting latency timer to 64
pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
vesafb: mode is 1400x1050x32, linelength=5632, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011800000, using 5824k, total 5824k
Console: switching to colour frame buffer device 175x65
fb0: VESA VGA frame buffer device
ERST: Table is not found!
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
i8042: If AUX port is really absent please use the 'i8042.noaux' option
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 10
Mobile IPv6
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Checking hibernation image partition /dev/sda5
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:04: setting system clock to 2013-06-26 02:05:56 UTC (1372212356)
Initializing network drop monitor service
Freeing unused kernel memory: 608k freed
udevd[65]: starting version 175
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: irq 42 for MSI/MSI-X
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 42
ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 42
ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 42
ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 42
Refined TSC clocksource calibration: 3615.963 MHz.
Switching to clocksource tsc
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: WDC WD1002FAEX-00Y9A0, 05.01D05, max UDMA/133
ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
uvesafb: failed to execute /sbin/v86d
uvesafb: make sure that the v86d helper is installed and executable
uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
uvesafb: vbe_init() failed with -22
uvesafb: probe of uvesafb.0 failed with error -22
microcode: CPU0: patch_level=0x010000bf
platform microcode: firmware: agent loaded amd-ucode/microcode_amd.bin into memory
microcode: CPU0: new patch_level=0x010000dc
microcode: CPU1: patch_level=0x010000bf
platform microcode: firmware: agent loaded amd-ucode/microcode_amd.bin into memory
microcode: CPU1: new patch_level=0x010000dc
microcode: CPU2: patch_level=0x010000bf
platform microcode: firmware: agent loaded amd-ucode/microcode_amd.bin into memory
microcode: CPU2: new patch_level=0x010000dc
microcode: CPU3: patch_level=0x010000bf
platform microcode: firmware: agent loaded amd-ucode/microcode_amd.bin into memory
microcode: CPU3: new patch_level=0x010000dc
microcode: CPU4: patch_level=0x010000bf
platform microcode: firmware: agent loaded amd-ucode/microcode_amd.bin into memory
microcode: CPU4: new patch_level=0x010000dc
microcode: CPU5: patch_level=0x010000bf
platform microcode: firmware: agent loaded amd-ucode/microcode_amd.bin into memory
microcode: CPU5: new patch_level=0x010000dc
microcode: Microcode Update Driver: v2.00 , Peter Oruba
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
PM: Starting manual resume from disk
PM: Hibernation image partition 8:5 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
PM: Marking nosave pages: 000000000009b000 - 0000000000100000
PM: Marking nosave pages: 00000000cfcf0000 - 0000000100000000
PM: Marking nosave pages: 00000000c4000000 - 00000000c8000000
PM: Basic memory bitmaps created
PM: Basic memory bitmaps freed
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
udevd[421]: starting version 175
wmi: Mapper loaded
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
input: PC Speaker as /devices/platform/pcspkr/input/input2
scsi4 : pata_atiixp
scsi5 : pata_atiixp
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
ACPI: Power Button [PWRF]
ACPI: processor limited to max C-state 0
ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: setting latency timer to 64
r8169 0000:03:00.0: irq 43 for MSI/MSI-X
usbcore: registered new device driver usb
r8169 0000:03:00.0: eth0: RTL8168d/8111d at 0xffffc90000c68000, 1c:6f:65:93:08:55, XID 083000c0 IRQ 43
r8169 0000:03:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
powernow-k8: Found 1 AMD Phenom(tm) II X6 1090T Processor (6 cpu cores) (version 2.20.00)
powernow-k8: Core Performance Boosting: on.
powernow-k8: 0 : pstate 0 (3600 MHz)
powernow-k8: 1 : pstate 1 (2400 MHz)
powernow-k8: 2 : pstate 2 (1600 MHz)
powernow-k8: 3 : pstate 3 (800 MHz)
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
xhci_hcd 0000:02:00.0: setting latency timer to 64
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 49 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 50 for MSI/MSI-X
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.2.46-compil-14 xhci_hcd
usb usb1: SerialNumber: 0000:02:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.2.46-compil-14 xhci_hcd
usb usb2: SerialNumber: 0000:02:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
QUIRK: Enable AMD PLL fix
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02d000
SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
SP5100 TCO timer: mmio address 0xb8fe00 already in use
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
Linux agpgart interface v0.103
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.2.46-compil-14 ehci_hcd
usb usb3: SerialNumber: 0000:00:12.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe02b000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 3.2.46-compil-14 ehci_hcd
usb usb4: SerialNumber: 0000:00:13.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ehci_hcd 0000:00:16.2: EHCI Host Controller
ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:16.2: debug port 1
ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe028000
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
usb 1-1: new high-speed USB device number 2 using xhci_hcd
[drm] Initialized drm 1.1.0 20060810
ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb 1-1: New USB device found, idVendor=0951, idProduct=1643
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: DataTraveler G3
usb 1-1: Manufacturer: Kingston
usb 1-1: SerialNumber: 001CC0EC3450BB5057140000
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 3.2.46-compil-14 ehci_hcd
usb usb5: SerialNumber: 0000:00:16.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe02e000
[drm] radeon kernel modesetting enabled.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 3.2.46-compil-14 ohci_hcd
usb usb6: SerialNumber: 0000:00:12.0
checking generic (d0000000 5b0000) vs hw (d0000000 10000000)
fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 5 ports detected
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02c000
radeon 0000:01:05.0: setting latency timer to 64
[drm] initializing kernel modesetting (RS880 0x1002:0x9714 0x1458:0xD000).
[drm] register mmio base: 0xFDEE0000
[drm] register mmio size: 65536
ATOM BIOS: B43106_DVI
radeon 0000:01:05.0: VRAM: 624M 0x00000000C0000000 - 0x00000000E6FFFFFF (624M used)
radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=624M, BAR=256M
[drm] RAM width 32bits DDR
[TTM] Zone kernel: Available graphics memory: 3839234 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 624M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] radeon: ib pool ready.
[drm] Loading RS780 Microcode
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 3.2.46-compil-14 ohci_hcd
usb usb7: SerialNumber: 0000:00:13.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 5 ports detected
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 8
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe02a000
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: OHCI Host Controller
usb usb8: Manufacturer: Linux 3.2.46-compil-14 ohci_hcd
usb usb8: SerialNumber: 0000:00:14.5
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
ohci_hcd 0000:00:16.0: OHCI Host Controller
ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 9
ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe029000
usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: OHCI Host Controller
usb usb9: Manufacturer: Linux 3.2.46-compil-14 ohci_hcd
usb usb9: SerialNumber: 0000:00:16.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 4 ports detected
platform radeon_cp.0: firmware: agent loaded radeon/RS780_pfp.bin into memory
platform radeon_cp.0: firmware: agent loaded radeon/RS780_me.bin into memory
platform radeon_cp.0: firmware: agent loaded radeon/R600_rlc.bin into memory
[drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
radeon 0000:01:05.0: WB enabled
[drm] fence driver on ring 0 use gpu addr 0xa0000c00 and cpu addr 0xffff880206247c00
Initializing USB Mass Storage driver...
[drm] ring test on 0 succeeded in 0 usecs
scsi6 : usb-storage 1-1:1.0
[drm] ib test on ring 0 succeeded in 0 usecs
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 1:
[drm] DVI-D
[drm] HPD1
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] DFP1: INTERNAL_KLDSCP_LVTMA
[drm] radeon: power management initialized
[drm] fb mappable at 0xD0142000
[drm] vram apper at 0xD0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.16.0 20080528 for 0000:01:05.0 on minor 0
usb 7-1: new full-speed USB device number 2 using ohci_hcd
usb 7-1: New USB device found, idVendor=046d, idProduct=c245
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-1: Product: Gaming Mouse G400
usb 7-1: Manufacturer: Logitech
input: Logitech Gaming Mouse G400 as /devices/pci0000:00/0000:00:13.0/usb7/7-1/7-1:1.0/input/input3
generic-usb 0003:046D:C245.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Gaming Mouse G400] on usb-0000:00:13.0-1/input0
generic-usb 0003:046D:C245.0002: hiddev0,hidraw1: USB HID v1.10 Device [Logitech Gaming Mouse G400] on usb-0000:00:13.0-1/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 9-3: new full-speed USB device number 2 using ohci_hcd
usb 9-3: New USB device found, idVendor=0556, idProduct=0001
usb 9-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 9-3: Product: AK5370
usb 9-3: Manufacturer: AKM
usb 9-4: new full-speed USB device number 3 using ohci_hcd
usb 9-4: New USB device found, idVendor=0783, idProduct=0009
usb 9-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 9-4: Product: USB SMART CARD KEYBOARD
usb 9-4: Manufacturer: C3PO
usb 9-4: SerialNumber: 00147785
input: C3PO USB SMART CARD KEYBOARD as /devices/pci0000:00/0000:00:16.0/usb9/9-4/9-4:1.0/input/input4
generic-usb 0003:0783:0009.0003: input,hidraw2: USB HID v1.10 Keyboard [C3PO USB SMART CARD KEYBOARD] on usb-0000:00:16.0-4/input0
input: C3PO USB SMART CARD KEYBOARD as /devices/pci0000:00/0000:00:16.0/usb9/9-4/9-4:1.1/input/input5
generic-usb 0003:0783:0009.0004: input,hidraw3: USB HID v1.10 Device [C3PO USB SMART CARD KEYBOARD] on usb-0000:00:16.0-4/input1
scsi 6:0:0:0: Direct-Access Kingston DataTraveler G3 PMAP PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: [sdb] 30695424 512-byte logical blocks: (15.7 GB/14.6 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 03 41 00 00
sd 6:0:0:0: [sdb] No Caching mode page present
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] No Caching mode page present
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 6:0:0:0: Attached scsi generic sg1 type 0
sdb: sdb1 sdb2 sdb3
sd 6:0:0:0: [sdb] No Caching mode page present
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Attached SCSI removable disk
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
Adding 8787964k swap on /dev/sda5. Priority:-1 extents:1 across:8787964k
EXT4-fs (sda3): re-mounted. Opts: (null)
EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
loop: module loaded
it87: Found IT8720F chip at 0x228, revision 8
it87: Routing internal VCCH to in7
it87: Beeping is supported
input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
snd_hda_intel 0000:01:05.1: setting latency timer to 64
usbcore: registered new interface driver snd-usb-audio
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
fuse init (API version 7.17)
r8169 0000:03:00.0: firmware: agent loaded rtl_nic/rtl8168d-2.fw into memory
r8169 0000:03:00.0: eth0: link down
r8169 0000:03:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
r8169 0000:03:00.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
input: ACPI Virtual Keyboard Device as /devices/virtual/input/input7
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
eth0: no IPv6 routers present
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
Ebtables v2.0 registered
ip6_tables: (C) 2000-2006 Netfilter Core Team